Specifications

                             Microcontroller                      ATMEGA328PU (Arduino bootloader)

                                    INPUT Voltage                        7-24V DC(1.5-2A)

                                    Input Signal                             7 CH   ALL ISOLATE         

                                    Output Digital                         9 CH   5V 20mA.                                                   

                                    Output Analog                        1 CH (0-10VDC) 20mA.

                                    USB PROT                               1CH USB B 2.0 (FTDI232)

                                    Dimension(mm.)                     100X100 mm.

                                    Firmware support                   GRBL 1.1h , ESTLCAM

1. USB PROT 2.0

2. LED INDICTER OUTPUT

3. REBOOT/RESET BUTTON

4. PIN EXTERNAL TTL  

5. OUTPUT TO STEP DRIVER

6. Analog OUTPUT 0-10V or PWM and Enable signal ON/OFF SPINDEL

7. INPUT POWER 7-24VDC 1-2Amp

8. Jumper select between PWM or 0-10V Output (10/PWM)

9. . Jumper selects between INPUT POWER or +5V for Isolate INPUT

10. Input Switch ABORT, FEED HOLD, RESUME,PROBE (NO)

11. Input Switch Limit/HOME  X Y Z (NO)

12. Jumper select between external Power or USB Power

13. Trimming OUTPUT 0-10 V

โปแกรม GRBL สำหรับ BOARD EASY CNC 3.0 คลิก